FERODO High-Performance Clutch Plate Kit with Friction and Drive plates are designed as a racing replacement set for the original fitment items.

FCS0379/3 contains 7 Hi-Performance & 2 STD compound friction plates and 8 steel drive plates.

Note: The two STD compound plates must be fitted one at each outer end of the clutch pack.

• The friction material of the Hi-Performance Friction Plates does not contain any cork or rubber material to assist with the reduction of sticking or slippage.
• The friction material of the STD friction Plates do contain cork or rubber material and are for the outer end/s of the clutch pack.
• The Steel Drive Plates eliminate the problem of the aluminium drive plate wear and contamination of the engine/transmission oil.
• A Heavy Duty Clutch Spring Kit is available as an optional service item.
• FERODO recommends that new oil be used to enhance the benefits when fitting new FERODO Clutch Plates.

Tip: For two hours before fitment, new friction plates should be submersed in the new engine or transmission oil.

This allows the clutch plate material to absorb the oil to assist with the initial start-up and ongoing usage.

FERODO suggest the other clutch components be thoroughly inspected for wear and suitability before re-assembly - replace if necessary.